Madge Networks 802.11b Bedienungsanleitung Seite 1

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Vernetzung Madge Networks 802.11b herunter. Other Link Layer Protocols and Technologies Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken

Inhaltsverzeichnis

Seite 1 - Protocols

Link Layer Standards and Protocols

Seite 2 - Link Layer Standards

Other Features of Token Ring• A user can designate a priority value so that only those users with this value or higher can use the network• An active

Seite 3 - Services

11FDDI -Fiber Distributed Data Interface (ANSI X3T12)• Similar to token ring, except that– FDDI runs on fiber-optic (token ring runs on twisted pair)–

Seite 4 - Logical Link Control Services

12ThroughputToken ringToken busCSMA/CD bus24.020.04.0Non-contention based, deterministic access gives token ring/bus technologies better throughput

Seite 5 - Standard Link Layer Protocols

Elements of a Wireless NetworkNetwork Infrastructure(Optional)Wireless hosts• Laptop, PDA, IP phone• Run applications• May be stationary (non-mobile)

Seite 6 - IEEE 802.5/IBM Token Ring

Elements of a Wireless NetworkNetwork infrastructureBase station• Typically connected to wired network• Relay - responsible for sending packets betwee

Seite 7

Elements of a Wireless NetworkNetwork InfrastructureWireless link• Typically used to connect mobile(s) to base station• Also used as backbone link • M

Seite 8 - Token Ring Operation

Elements of a wireless networkNetwork InfrastructureInfrastructure mode• base station connects mobiles into wired network• handoff: mobile changes bas

Seite 9 - Token Ring MAC Frame

Elements of a wireless networkAd hoc mode• No base stations• Nodes can only transmit to other nodes within link coverage• Nodes organize themselves in

Seite 10 - Other Features of Token Ring

Wireless Link Characteristics• Differences from wired link ….– Decreased signal strength: radio signal attenuates as it propagates through matter (pat

Seite 11 - (ANSI X3T12)

Wireless LANs and CSMA• Before transmitting, a sending station needs to know if there is activity around the receiver– Is CSMA/CD effective here?• CSM

Seite 12

Link Layer StandardsLLC IEEE 802.2MAC IEEE 802.XIP Layer (Network Layer)Physical Layer

Seite 13 - • May be stationary (non

Hidden Terminal Problem• Node B can communicate with both A and C• A and C cannot hear each other• When A transmits to B, C cannot detect the transmis

Seite 14 - Network

Exposed Station Problem• Station B is transmitting to station A• Station C wanting to transmit to station D, would do the following– Sense the channel

Seite 15 - Infrastructure

General Techniques for Medium Access in Wireless• Use CSMA/CA : – sense channel for traffic– wait a random amount of time and start transmitting– Use

Seite 16

IEEE 802.11 Wireless LAN• 802.11b– 2.4-5 GHz unlicensed radio spectrum– up to 11 Mbps– direct sequence spread spectrum (DSSS) in physical layer• all h

Seite 17

802.11 LAN architecture• Wireless host communicates with base station– base station = access point (AP)• Basic Service Set (BSS)(aka “cell”) in infras

Seite 18 - Wireless Link Characteristics

802.11: Channels, association• 802.11b: 2.4GHz-2.485GHz spectrum divided into 11 channels at different frequencies– AP admin chooses frequency for AP–

Seite 19 - Wireless LANs and CSMA

802.11 Modes of Operation• Most wireless devices cannot transmit and listen at the same time on a single frequency, thus CSMA/CD is not used• The supp

Seite 20 - Hidden Terminal Problem

DCF• DCF, Distributed Coordination Function– No central controller; just like Ethernet– Protocols used are:• CSMA/CA (CSMA with Collision Avoidance)–

Seite 21 - Exposed Station Problem

IEEE 802.11: Medium Access• Avoid collisions: 2+nodes transmitting at same time• 802.11: CSMA - sense before transmitting– don’t collide with ongoing

Seite 22 - Access in Wireless

IEEE 802.11 MAC Protocol: CSMA/CA802.11 sender1 if sense channel idle for DIFS thentransmit entire frame (no CD)2 if sense channel busy thenstart rand

Seite 23 - IEEE 802.11 Wireless LAN

Medium Access Control Layer Services• Concerned with the following– Channel allocation– Random backoff during collision– Prioritizing– Error detection

Seite 24 - 802.11 LAN architecture

Avoiding Collisions (more)Idea: allow sender to “reserve” channel rather than random access of data frames: avoid collisions of long data frames• se

Seite 25 - 802.11: Channels, association

Collision Avoidance: RTS-CTS exchangeAPABtimeRTS(A)RTS(B)RTS(A)CTS(A)CTS(A)DATA (A)ACK(A)ACK(A)reservation collisiondefer

Seite 26 - 802.11 Modes of Operation

The 802.11 MAC Protocol…NAV=NetworkAllocationVector,aninternalremindertokeepquietforacertainperiodoftime• The use of virtual channel s

Seite 27 - – Protocols used are:

The 802.11 MAC Protocol…• NAV for a particular node depends on which frame it is able to hear– Nodes in sender’s range have longer NAV compared to nod

Seite 28 - IEEE 802.11: Medium Access

PCF: Point Coordination Function• The base station polls the other stations asking if they have any frames to transmit, and co-ordinates transmissions

Seite 29 - - if frame received OK

Extending Wireless Network• Some nodes are allowed to roam (e.g., your laptop) • Access points (AP) or base stations, are connected to a wired network

Seite 30 - Avoiding Collisions (more)

Extending Wireless Network…• Each roaming station must be associated with a single AP. This can be done:– Via active scanning, • The node sends a Pro

Seite 31 - Collision Avoidance: RTS-CTS

framecontroldurationaddress1address2address4address3payload CRC22 66 6 260 - 23124seqcontrol802.11 Frame: AddressingAddress 2: MAC addressof wireless

Seite 32 - The 802.11 MAC Protocol…

InternetrouterAPH1R1AP MAC addr H1 MAC addr R1 MAC addraddress 1address 2address 3802.11 frameR1 MAC addr AP MAC addr dest. address source address 8

Seite 33

framecontroldurationaddress1address2address4address3payload CRC22 66 6 260 - 23124seqcontrolTypeFromAPSubtypeToAPMore fragWEPMoredataPowermgtRetry Rsv

Seite 34

Logical Link Control Services• MAC layer is best-effort. Additional features can be introduced via LLC. IEEE 802.2 committee defines three types of LL

Seite 35 - Extending Wireless Network

802.11 Services• Distribution Services (inter-cell)– Association• When a station enters the range of a base station– Disassociation• Breaking connecti

Seite 36 - Extending Wireless Network…

802.11 Services…• Station services (Intra-cell)– Authentication• After association, a challenge/response interaction is done– De-authentication–Privac

Seite 37 - 802.11 Frame: Addressing

Wi-MAX (802.16)• Worldwide Interoperability for Microwave Access• Originally conceived as the “last-mile”technology• Client systems, called subscriber

Seite 38 - 802.11 frame: addressing

The 802.16 Physical Layer• The 802.16 transmission environment.

Seite 39 - 802.11 frame: more

802.16 Physical Layer• Operates in the 10-to-66 GHz frequency range.– 802.16a will operate in the 2-to-11 GHz band– 802.16b will operate in the 5 GHz

Seite 40 - 802.11 Services

Other Popular Wireless• Bluetooth : Aimed to eliminate wires between personal networked devices– E.g., data transfer between a PDA and a cell phone• U

Seite 41 - 802.11 Services…

Standard Link Layer Protocols• Ethernet (IEEE 802.3)• Token Ring (IEEE 802.5/IBM)• FDDI (ANSI X3T12)• Wireless– Wi-fi (802.11x)– Wi-Max (IEEE 802.16)–

Seite 42 - Wi-MAX (802.16)

IEEE 802.5/IBM Token Ring• The stations form a logical ring (star-wired-ring network)– Small frame (token) circulates when idle– Only the possession o

Seite 45 - Other Popular Wireless

Token Ring MAC FrameToken Specifier

Kommentare zu diesen Handbüchern

Keine Kommentare